Pole Mounted Dustbin Size & Capacity Guide – 40L to 120L

Choosing a pole mounted dustbin is easier when you know how much waste the location produces and how often the bin will be emptied.

A small outdoor area may work well with a 40L or 50L bin, while parks, institutions, roadside areas and other busy locations may need 60L, 80L, 100L or larger capacities.

One important point is that bin capacity and total system capacity are not always the same. A twin dustbin with two 60L containers, for example, provides 120 litres of combined capacity.

You can also view our complete range of Pole Mounted Dustbins for available designs and configurations.

[IMAGE 1 – HERO: Clean professional group image showing different stainless steel pole mounted dustbin configurations such as single bin, twin bin and roof model; white/clean background; no excessive promotional text.]

Pole Mounted Dustbin Size Chart

The table below shows common stainless steel pole mounted dustbin sizes and their approximate capacities.

These dimensions refer to common cylindrical bin sizes. Overall product dimensions can be larger because the pole, support frame, roof, name plate or mounting structure is not included in the bin-body measurement.

For 100L and 120L models, dimensions may vary according to the selected design and project requirement.

Is a 40L Pole Mounted Dustbin Enough?

A 40 litre pole mounted dustbin is a practical choice where daily waste generation is relatively low.

The common 12 × 24 inch cylindrical size keeps the bin compact without making it too small for routine outdoor use. It can work well near office premises, entrances, walkways, smaller gardens and similar locations.

For a simple single-bin installation, see the Stainless Steel Single Pole Mounted Dustbin.

50L and 60L – Useful Mid-Range Sizes

For many public and institutional locations, 50L and 60L are more practical than very small bins.

A 50L bin provides some extra holding capacity while keeping the installation compact. A 60 litre pole mounted dustbin, commonly available in a 14 × 24 inch body size, is suitable where waste collection is regular but footfall is higher.

The 60L size is also useful in twin and multi-bin systems because the same capacity can be repeated for separate waste streams.

For example:

2 × 60L = 120L combined capacity

and

3 × 60L = 180L combined capacity

This makes it easier to create dry, wet or multi-category waste segregation stations.

What Do 70L, 80L and 90L Sizes Offer?

Larger 70L, 80L and 90L bins reduce the need for very frequent emptying at locations where more waste is generated.

A 70L or 80L model may suit parks, campuses, commercial premises and busy outdoor common areas. A 90L model provides more storage while still keeping the waste container mounted above or alongside the support structure.

The correct size should depend on actual waste volume rather than simply choosing the largest available bin.

100L Pole Mounted Dustbin

A 100 litre pole mounted dustbin is better suited to locations where smaller bins would fill too quickly.

Roadside areas, large premises and busy public spaces are common examples. Because high-capacity designs can use different body shapes and mounting arrangements, there is no need to assume one fixed dimension for every 100L model.

See our 100L Roadside Pole Mounted Dustbin for a high-capacity outdoor configuration.

Understanding 120L Capacity

The term "120 litre pole mounted dustbin" can describe more than one configuration.

A twin pole mounted dustbin may use two 60L bins:

60L + 60L = 120L total capacity

This arrangement is especially useful when two waste streams need to be kept separate.

See the Twin Pole Mounted Dustbin for a dual-bin configuration.

A 120L model can also be designed as a single high-capacity municipal bin, depending on the application and product design.

For civic and public-area use, see the Municipal Pole Mounted Dustbin.

Single Bin or Twin Bin – Which Capacity Should You Choose?

Capacity should not be selected only by looking at total litres.

A single 60L bin gives one 60L waste container. A twin 60L + 60L setup gives 120L in total, but it also provides two separate compartments. This is useful where dry and wet waste need to remain separated.

For three-way segregation, a 3 in 1 Pole Mounted Dustbin can provide three individual waste containers on one supporting system.

So, before choosing capacity, decide whether you need more waste volume, more waste categories, or both.

Which Pole Mounted Dustbin Size Is Suitable for Your Location?

As a general selection guide, 40–50L works well where waste generation is limited. A 60–70L bin is a practical middle range for parks, schools and institutional premises. Higher-capacity 80–100L models are more suitable where footfall and waste volume are greater.

For wet and dry waste segregation, two smaller bins can often be more useful than one large bin because each waste stream gets its own container.

Municipal and project requirements may need larger or customised configurations depending on collection frequency, installation area and the number of users.

Does SS Grade Affect Dustbin Size?

No. SS 202 and SS 304 refer to the stainless steel grade, not the capacity of the bin.

The same capacity can be manufactured in different stainless steel grades depending on the application and project specification.

We will cover this separately in our SS 202 vs SS 304 Dustbin Guide, because material grade and bin capacity are two different buying decisions.

What About a Pole Mounted Dustbin with Roof?

Adding a roof does not automatically change the capacity of the bin.

The roof is part of the supporting structure and helps create a covered outdoor configuration. Twin-bin models can also be supplied with a roof where required.

See the Twin Pole Mounted Dustbin with Roof for this type of setup.

Frequently Asked Questions

What is the standard size of a pole mounted dustbin?

There is no single size for every pole mounted dustbin. Common cylindrical sizes include 12 × 24, 12 × 28, 14 × 24, 14 × 28, 15 × 28 and 16 × 28 inches, with capacities varying accordingly.

What is a good capacity for a public park?

A 50L to 70L bin can be suitable for many park locations, but the correct capacity depends on footfall, waste generation and how frequently the bins are emptied.

What does 120L twin dustbin mean?

A 120L twin system can consist of two 60L bins. Each bin has 60L capacity, while the complete unit provides 120L combined capacity.

Are 100L pole mounted dustbins available?

Yes. Higher-capacity models such as 100L can be used for roadside, public and other high-waste-volume locations. Dimensions can vary according to the selected design.

Can pole mounted dustbin sizes be customised?

Yes. Capacity, bin dimensions, pole structure, roof, name plate, waste labels, stainless steel grade and other details can be selected according to project requirements.

Need Help Choosing the Right Size?

There is no advantage in installing an oversized bin where a smaller one will be emptied regularly, and an undersized bin can become inconvenient at a busy location.

The best approach is to match the capacity, number of bins and mounting design with the actual site requirement.

Steel Shakti Fabrication Works manufactures stainless steel pole mounted dustbins in single, twin and multi-bin configurations for bulk and project requirements.

View All Pole Mounted Dustbins